Kodiak - Threaded
We built you the ultimate 22LR suppressor!!! The Kodiak is rated for the following calibers: 22LR, 17M2, 17 HMR, 22 MAGNUM, FN 5.7mm  x 28mm
& 22 Hornet. It is made entirely of 300 series stainless steel and this suppressor is designed to be taken apart and cleaned by the end user. Don't forget, it is full auto rated for 22LR, AND 22MAGNUM as well !!!!! The guys with the Tippmann beltfeds in 22Mag now have a can!!! Available in three colors: Flat Black, OD Green, and Brushed Stainless. *Please be aware that doing mag dumps from an American 180 will burn the surface finish of the suppressor and this is not covered by the warranty. The Kodiak is NOT rated for 223 REM/ 5.56NATO in any way, shape, or form. Firing this round through a Kodiak will quite possibly destroy your silencer by weakening components in the baffle assembly.  We will NOT warranty damage caused by this kind of use. I must repeat, DO NOT SHOOT 223 / 5.56 THROUGH YOUR KODIAK!!!!!

MSRP:$485
$
0.00    
Kodiak-TL - Threaded
The Kodiak TL (T - Titanium  & L - Lightweight) is the latest version of 22 suppressor in our lineup. This suppressor is rated for the following calibers: 22LR, 22WMR, 17M2 & 17HMR. Note: This unit is rated for full auto in 22LR only. It weights 6 ounces and the external footprint is the same as the normal Kodiak (1"x 6.5").  It uses a titanium tube along with a stainless steel monolithic core and rear cap.  It is also a take apart design as well.  The Kodiak TL is provided with the special tools needed for disassembly as well. Available in Black, OD Green and Brushed Stainless finish. Tested at 113.4dB on a Ruger MK II with a 3.5" barrel. Goto www.nfatalk.org for this info and much more in the reviews section.

MSRP:$535
$
0.00    
The Essence Of Liberty - Threaded
The Essence of Liberty is a rimfire suppressor designed from the ground up with every possible feature that is desirable in a rimfire suppressor. It is lightweight, being made with over 95% titanium in its construction, this suppressor virtually disappears on the end of your weapon system.  We utilize a stainless steel replaceable blast baffle that will allow the suppressor to last several lifetimes with virtually no wear on the critical parts.  It has world class sound reduction on BOTH a pistol AND a rifle.  It has reduced blow back due to the high efficient baffle design that redirects high velocity gasses into the suppressor and not back into the gun. It comes apart for cleaning with minimal effort.  The tube is not threaded, but rather the endcap threads directly into the core,  nor is the tube exposed to the blast energy at the muzzle. It has a tapered bore to allow for slight variations in alignment.  Essence is now available in multiple colors - Black, OD Green, Stainless. Calibers: 22LR, 22MAG, 17HMR, 17M2 & Full Auto Rated Length : 6.5" Diameter : 1" Material : Titanium / Stainless steel blast baffle. Weight : 4.3 ounces / 121 grams aproximate Approx. DB Reduction: 39 to 42dB
Mounting type: 1/2-28 TPI thread mount

MSRP:$635
$
0.00    
Pinnacle-II - Integral 10/22
The Pinnacle 2 is a new generation of suppressor.  It is an integrally built suppressor,  that will allow you to use BOTH subsonic ammo and supersonic ammo in your Ruger 10-22 rifle and all of it will stay subsonic.* It is built into the .920 barrel chassis and is 16.5" overall length.  They are only available in stainless steel. Did I mention this can comes apart for cleaning too? It is provided with the special tools for extracting the core from the tube.  All stainless internals means an easy cleaning for this can as well. Comes complete with host & Hogue overmold stock.


MSRP:$999
$
0.00    
Mystic - Multi Cal.
Made entirely from Titanium and Stainless Steel, this suppressor weighs in at a little over 15 ounces with a recoil booster installed in it. This suppressor can be "dipped" ultrasonically, sand blasted, or soaked in harsh solvents without fear of damage to the unit. Did I mention that is also full auto rated? Well it is!!! We also decided to make it adaptable to other makers mounting devices as well, like the Multimount adapters as well as TROS boosters too. We also make an adapter ring to mount the Triad three lug mount to the Mystic as well. These features make this the perfect transition suppressor for sealed aluminium suppressor owners. Since all the mounts will work with the Mystic, this saves the end-user considerable money when it comes to buying mounts. There has been a lot of interest in using this unit on 223 rifles as well as the intended caliber. It can be used on 223 under limited conditions. Low rates of fire with cooling periods and no mirage covers. The use of a mirage cover will hide the obvious indicator of the unit getting hot by producing mirage.  This is a great indicator to let the shooter know that the can needs to cool off.  Also, in 223 the barrel must be at least 16" in length. The Mystic is rated for the following calibers: 22 Hornet, 22 K Hornet, 218 Bee, 223 REM - 16" BBL, 30 PPC - Subsonic, 
30 Carbine, 32-20, 357 MAG, 221 Fireball, 32 S&W Long, 32 H&R Magnum, 380 ACP, 9X18, 9X19 (Base Caliber), 38 Super, 38 Special, 38 S&W, 357 Max - Subsonic, 338 Spectre, 300 BLK, 300 Whisper, 300/221, 308 Win- Subsonic. Mystic with core driver and no mount. Pistons & adapters sold separately depending on host.

MSRP:$750
$
0.00    
The "Torch of Liberty" - .223/5.56 Threaded
This is our all stainless 223 suppressor, we build these suppressors for the AR15 family of rifles specifically. They are thread mounted to maintain maximum alignment with the bore.  They are available in black, green, or brushed stainless as well, but expect them to discolor with use if you shoot high volume rates of fire due to the heat. The reason it is named the "Torch" ?  Shoot a few rounds through one and then if you touch it.....you will know.


MSRP:$495
$
0.00    
The "Torch" Q.D. - .223/5.56 Quick Attach
The QA version of the torch is a rapid attachment design that is intended for quick deployment when suppression is needed rapidly in special situations.  The mount replaces the original washer that fits between the flash hider and barrel shoulder. We designed it to where any normal flash hider on the market today will fit and the suppressor will still work fine. The A1 flash hider in this picture shows the mounting scheme. Added length to the weapon is less than 6 inches since it telescopes over the flash hider. Please note that this mounting device will only fit barrels .740" and less in diameter. Your barrel may need to have a special profile machined on it to accept this mount if it is too large.

MSRP:$580
$
0.00    
Freedom - Threaded 7.62
The Freedom Suppressor is the result of ongoing research and development here at Liberty Suppressors.  This suppressor uses the innovative square bore technology that we developed for our Pandora line of suppressors.  The suppressor mounts via a traditional thread mounting scheme for better accuracy and repeatability as well. This suppressor produces world class suppression in excess of 31dB* and is lighter weight than most suppressors in the same class. We also offer this suppressor in a magnum version. It is 1" longer and rated up to 300 WINMAG.
Add 100$ for the Freedom MAG over the regular Freedom price. All Production Suppressors includes a Battlecloth Pouch.

MSRP:$830
$
0.00    
Freedom Magnum QA - 7.62
The Freedom QA is designed to meet the stringent needs of the long-range rifleman of the 21st century. We use titanium in the tube to reduce weight and a muzzle brake mount to reduce recoil along with stainless steel in a rapid thread attachment scheme to install the suppressor in three turn on the weapon. Includes one mount.



MSRP:$1045
$
0.00    
Victory - Threaded 7.62
The Victory is the apex of rifle silencer design.  We used titanium for all the components and then lined the blast chamber with stainless steel to eliminate ablative sparking and baffle erosion in the blast area. This suppressor works very well in reducing the sound signature of the host weapon to incredibly low levels.  Only a few rifle silencers in the world can achieve this level of suppression. This incredible performance is due to ongoing research here at our facility. We utilize the popular square bore technology pioneered in the Pandora and later used in the Freedom line to bring the suppression to new lows. Designed primarily for long range rifle shooters, this suppressor works very well on AR10 chassis weapon systems as well. It will work on lesser caliber weapons as well as long as the bore alignment is maintained. It has excellent characteristics on 5.56mm caliber AR15 weapons due to the lessened blowback of the 30 caliber square bore design.

MSRP:$1195
$
0.00